As the leader in Anti-Collision, we created LaserGuard to watch over your operation. LaserGuard silently protects your most valuable assets-your people, your facility and your cranes.

The system uses self-monitoring optical lasers to monitor your crane's position. This is the most technologically advancedanti-collision system in the industry; LaserGuard is flexible enough to manage crane-to-crane and wall-to-crane operation. The rugged NEMA 4X housing and Class 1 laser have a rated life of more than 10 years. Plus, it's easy to install and maintain.

The Laser Guard has a range of 150 feet and can be
adjusted for three individual contact closures within
the range. The system also features an alarm circuit
if signal degradation occurs.
 

LaserGuard Features & Benefits

Optical laser continually monitors crane position		Primary signaling is not affected by electrical noise
Crane-to-Crane LaserGuard provides "dynamic protection"		Multiple cranes are protected when they are in motion on the same runway.
Installer sets 3 programmable Control Zones		3 emergency signals: Alarm, Slow, Stop, Do Not Enter!
Standard 85-240V AC, optional power supply of 10-80 & 180-300V DC		The flexibility to work with almost any crane configuration.
Optical range 10 to 150 feet		Outputs can be tailored to activate within a wide optical range.
LaserGuard is wireless		No requirement to install additional runway conductor
0.5 feet over the operating range		Highly accurate
Installer aligns laser using a simple alignment chart		We have eliminated the guesswork by making it simple to adjust and install
State-of-the-art infrared laser technology		The laser can acquire its target under any lighting conditions.
Technical support		Experts are available via telephone to serve you during installation
Easy installation		A simplified procedure gets our crane back on-line
Laser systems never interfere with each other		Can be installed on several cranes in a single operating area
Single pole, normally open or normally closed contact transfer		Standard relay outputs make LaserGuard simple to install
LaserGuard is the market leader		You have the confidence that LaserGuard is proven in use everyday
Class 1 laser meets or exceeds all OSHA 6 environmental regulations		Satisfying the strictest standards for environmental safety-if you look directly into the laser it will not hurt your eyes
Military spec, shock mounted circuit board		Withstands the rigors of the most rugged daily use
Optical path degradation detector (Watch dog)		Integral patented design auto checks unit and provides fault if laser "loses" its target.

LaserGuard Applications

Prevention of Crane and End of Runway Collision

Prevention of Multiple Crane Collision